|
|
Renovation apartment building Křenová 76, Brno
Neduchal, Zbyněk ; Novotný, Miloslav (referee) ; Petříček, Tomáš (advisor)
The bachelor thesis elaborates the project documentation for the realization of the building for the renovation of the apartment building on street Křenová 76 in Brno. The building is divided into two residential above-ground floors and a non-residential basement and an attic. On both above-ground floors there are two dwellings that are not currently being used. The foundations are made of bricks, vertical and non-bearing walls are also made of bricks, horizontal structures are in the basement of barrel vault and in the above-ground floors there are wooden joist floor with reed. The roof truss is made out of a purlin system with a strutted purlin roof, a roof made of clay tile roofing. There will be seven new apartments and a café in the 1st floor with an outdoor terrace in the garden area. The rehabilitation of wet masonry by pressurized grouting, ventilated flooring with igloo system, wooden joist floor with a reinforced concrete slab and a newly ventilated roofing cladding with thermal insulation between and above ramps with folded roofing made out of ceramic tiles will be carried out.
|
|
|
Multifunctional house in Strakonice
Kolesa, Jiří ; Rozehnal, Miroslav (referee) ; Štěpánek, Ladislav (advisor)
The subject of this thesis is the design and project documentation of a new multifunctional house in Strakonice. The building has four floors, without basement, and is located on a slightly sloping land in the suburban part of the town of Strakonice. It is based on shallow foundations and covered with a flat roof. It is a transverse wall structural system, build with clay block masonry, with the semi-assembled ceiling structures of ceramic and concrete beams and inserts. It is conceived as a double-aisle layout. The ground floor of each wing consists of the establishment of shops and house facilities. The overground floors are designed as six residential units of varying size category. Both tracts have separate entrances to both the residential portion and to individual businesses. The building is designed from traditional building materials. In addition to the architectural construction and civil-engineering design, a part of this project is also a fire safety design and an assessment from the perspective of building physics.
|
|
|
Small Apartment House
Kopecká, Lucie ; Šuhajdová, Eva (referee) ; Šuhajda, Karel (advisor)
This bachelor thesis deals with the design of a four-storey apartment building in Staré Město near Uherské Hradiště. The object is situated in a quiet part of the town and is set in a gently sloping terrain. It is based on strip foundations and has two types of roofing – above the second floor there is a green roof and above the third floor there is a non-walkable warm flat roof. The vertical load-bearing structures are designed from permanent formwork in the basement and from the Porotherm system on the above-ground floors. The Etics contact thermal insulation system is incorporated into the external wall. The floor structures, the walls near the lift, and the staircase are from the cast-in-place reinforced concrete. The building consists of a basement and four storeys with a total of seven dwelling units. On the ground floor there is a wheelchair accessible flat. The other dwelling units have access to a balcony or terrace. On the ground, first, and second floor there are two flats. On the third floor there is only one flat. The habitable rooms of each flat are situated to the southwest. In the basement there are cellar units for each dwelling unit, a bicycle room, cleaning room, and two utility rooms. From the southwest part of the plot, there are parking places for the residents, bicycle stands, and a place for recycling. A 3D model of the building has been built.
|
|
|
Multifunctional building, Brumov - Bylnice
Skřek, Daniel ; Burianová, Lenka (referee) ; Kacálek, Petr (advisor)
The subject of this diploma thesis is the design of a multifunctional building, which consists of parking lots, store section, office as well as dwelling units. Multifunctional building has four above-ground floors, full basement and a flat roof. During processing, emphasis was placed on layout solutions to be designed according to legislation and standards. In the basement there are parking lots, the ground flood is used as a store section, the first floor consists of office units designed for start-up companies. The third and fourth floor consists dwelling units from one-bedroom to three-bedroom apartments. The building has a concrete frame structure combined with a masonry system from Porotherm ceramic pieces. Horizontal load bearing system is designed of two way reinforced concrete slabs. Walls bellow the ground level are made from core-filled reinforced concrete blocks. The building is supported by the spread footing concrete system. Multifunctional building is situated in flat terrain in the city of Brumov-Bylnice.
|
|
|
TOWNHOUSE ON THE WATERFRONT IN PŘEROV
Křivinková, Tereza ; Klement, Miloš (referee) ; Pelčák, Petr (advisor)
Architectural and urban design is flowing from the structure of the buildings on Brabansko Street. Dwelling house with a commercial ground-floor and underground parking concur the mass of Sokol house. The house is moved 1m to the side of the street line in a lateral Malá Dlažka Street, which creates a possibility to have a wider pavement in the future. Architecturally, there is a clear diversity between public and private parts of the house. Upper floors are determinated for dwelling by a large horizontal stay loggie towards the street side and by unclosed balcony towards the court side. Both are placed along the length of the house and glassed as much as possible. The house is open to the view on the historic city and the river Bečva as well as to the inner garden. By contrast the ground floor is higher and fully glassed in a vertical direction. The corner situation is drawn out by a console of dwelling floors overlapping above the round part and further a bit above the pavement. Entrance to the dwelling part naturally attracts to enter the house and the court behind it. There is enough space to room a terrace, in a summer time, for a café placed inside the round shape on the ground floor. Commercial units are completely independent on the other functions. The house by its variability creates a possibility for a sustainable town house.
|
|
|
Apartment house with massage therapy in Vyškov
Vavřínek, Dominik ; Vlach, František (referee) ; Štěpánek, Ladislav (advisor)
The subject of this bachelor thesis is the design of an apartment house with massage therapy in Vyškov. The building has an atypical shape, partial basement and flat roof. The apartment consists of five above-ground floors and basement. In the basement there are a storage rooms, a bicycle room, a laundry room, a gym and a boiler room. On the ground floor there is one apartment, which is designed for people with reduced mobility and movement, as well as the massage therapy centre, which is separated from the housing part and has its own entrance. There is a total of 8 dwelling units from the second to fifth floor. Dwelling units on the fifth floor have a terrace. The main, as well as secondary entrance is situated from the north side of the building on the street of U Modrého. Parking lots for a total of 14 cars is situated on the eastern side. The apartment building is designed from a single masonry system with contact insulation. Both vertical and horizontal load-bearing system is made of Porotherm ceramic pieces. During processing, emphasis was placed on layout solutions, architectural appearance, statics requirements and safety of use.
|
|
|
Multi-functional Building
Kožina, Jan ; Sláma, Ludvík (referee) ; Mohelníková, Jitka (advisor)
The subject of my diploma thesis is the design documentation for polyfunctional building and will be supplemented with a specialty from the air-conditioning branch. The building is situated in the town Velká Bíteš and it's located at 336/1 and 336/8 about the total area of 5110 m2. The building has a L-shaped ground plan consisting. Has got three above-ground floors with partial basement. The building is designed as masonry structure with sharpened clay blocks Porotherm 38 Profi with thickness 380 mm. The ceiling from structure prestressed concrete floor slab Spiroll. The roof of the building is suggested as a single-coated flat roof. The building is covered with a ventilated facade from fiber cement board and thermal insulation is mineral fibreglass insulation Isover Multimax. The building is located on the first floor of the fitness room, on the second floor are offices and on the third floor there are 4 flat.
|
|
|
The Multipurpose Building in Opava
Gross, Petr ; Struhala, Karel (referee) ; Manychová, Monika (advisor)
The subject of this diploma thesis is the processing of design documentation for realization of the new-build multipurpose building in Opava. The building is designed on the grounds of a former dairy in the Krnovská street where the demolition of obsolete buildings passed off recently. Now are these areas designed to build up again. Designed object will function as a multipurpose building with the operation of a restaurant on the 1st floor, office spaces on the 2nd floor and dwelling units on the 3rd floor. Part of the first floor is a mass garage primarily intended for residents of dwelling units with a total of 9 parking places. It is designed eight dwelling units in total of which six are one-room flats and two are four-room flats. Plan shape of the building is rectangular. The londbearing structure of the building is a reinforced concrete prefabricated precast concrete frame founded on cast-in-place concreted pads. Infill walls are clay brick. The building is roofed with warm flat roof. Dominant features of the building are large glass areas in all floors, metal ventilated facade and loggias of dwelling units. The drawings are processed in AutoCAD programme.
|
|
|
Residence Sofie
Rajchl, Filip ; Kalánek, Jiří (referee) ; Ostrý, Milan (advisor)
This bachelor thesis deals with the design of the apartment house called Residence Sofie in Luhačovice (district Zlín). It is a five-storey building located in the center of the city on a planar terrain. The building consists of one underground and four above ground floors. In total there are 8 dwelling units, commercial premises and 6 garages. In the underground floor there is facilities for technical equipment of the building and storage. The ground floor consists mainly of garages and commercial premises. On the second floor there are 4 dwelling units and in the third and fourth 2 dwelling units. The object is designed from the longitudinal structural system of ceramic hollow blocks. The ceilings are část-in-place reinforced concrete and the roof is two-shed make of wooden trusses. The thesis contains design documentation for the implementation of the building.
|
|
|
Multifunctional building, Brumov - Bylnice
Skřek, Daniel ; Burianová, Lenka (referee) ; Kacálek, Petr (advisor)
The subject of this diploma thesis is the design of a multifunctional building, which consists of parking lots, store section, office as well as dwelling units. Multifunctional building has four above-ground floors, full basement and a flat roof. During processing, emphasis was placed on layout solutions to be designed according to legislation and standards. In the basement there are parking lots, the ground flood is used as a store section, the first floor consists of office units designed for start-up companies. The third and fourth floor consists dwelling units from one-bedroom to three-bedroom apartments. The building has a concrete frame structure combined with a masonry system from Porotherm ceramic pieces. Horizontal load bearing system is designed of two way reinforced concrete slabs. Walls bellow the ground level are made from core-filled reinforced concrete blocks. The building is supported by the spread footing concrete system. Multifunctional building is situated in flat terrain in the city of Brumov-Bylnice.
|
guest ::
